Notícias

O Diferença Entre I-beam E H-beam in Stainless Steel Perfis

Oct 16, 2023 Deixe um recado

Entre inox aço perfis, lá são dois perfis que são fáceis para erro, namely inox aço aço H-shaped steel e inox steel I-shaped steel. In fact, they are different in shape. Let's talk about the specific differences below.

48

Incolor aço I-feixe é a tipo de "I"-shaped cross-section steel. O interior superfície de o superior e inferior flanges has an inclinação, usualmente 1:6, que faz o flange fino em o fora e grosso em o dentro. Isso causa o aço inoxidável I-feixe para ser em dois principais planos. O transversal propriedades de aço são muito diferentes, e é difícil para exercer a força propriedades de aço em aplicações. Embora inox aço espessado I-feixes são também disponíveis em o feixe de I mercado, a estrutura de o feixe de I tem determinado que seu torcional resistência é fraco.

23

H-shaped steel is currently a widely used profile in steel structure buildings, and there are still many differences compared to I-beam. The first is the flange, and secondly the inner surface of the flange has no inclination, and the upper and lower surfaces are parallel. The cross-sectional properties of H-shaped steel are better than tradicional I-beam, channel steel and angle steel. É é an econômico cross-section e high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio.

26

Se I-shaped steel is ordinary or light, porque the cross-section size is relatively high and narrow, the moment of inertia of the two main sleeves of the cross-section is quite different, so it can usually only be used directly for bending in the plane of its web. components or form them into lattice-type stressed components. It is not suitable for axial compression members or members that are bent perpendicular to the web plano, que grande limites seu aplicação intervalo.

32

H-shaped steel is an efficient and economical section profile. Because of its reasonable cross-sectional shape, it can enable stainless steel materials to perform better and enhance load-bearing capacity. Different from the ordinary I-shaped steel, the flange of the H-shaped steel is widened, and the inner and outer surfaces are generally parallel, which makes it easy to connect with other components with high-strength bolts. Its size constitutes a reasonable series with complete models, which is convenient for design and selection.

33

The flanges of H-shaped steel are all of equal thickness, with either rolled sections or combined sections composed of three plates welded together. I-beams are all rolled sections. Due to poor production technology, the inner edge of the flange has a slope of 1:10. The rolling of H-shaped steel is different from that of ordinary I-shaped steel, which only uses a set of horizontal rollers. Because its flange is wide and has no slope, a set of vertical rollers must be added to perform rolling at the same time. Therefore, its rolling process and equipment All are more complex than ordinary rolling mills. The maximum height of rolled H-shaped steel that can be produced in China is 800mm. If it exceeds the height, it can only be welded and combined.

41

Com o desenvolvimento necessidades de aço estrutura edifícios, it is não viável para apenas uso I-vigas. Grosso I-vigas são prone para instabilidade quando usado em carga-rolamento colunas. I-vigas pode apenas ser usado para vigas, enquanto H-feixes pode apenas ser usado para carga-rolamento colunas de estruturas.

45

Enviar inquérito